Skip to content
Lighting design and DIALux evo

Lighting design and lighting simulation in DIALux evo

Interior, exterior, architectural and workplace lighting design; lighting simulation and illuminance calculation in DIALux evo with reports and false-color maps.

Tools: DIALux evo · AutoCAD

False-color illuminance map of a work room, calculated with 12 luminaires512576512258258373lx7506505504503502501500WORK PLANE 0.75 m · 12 LED LUMINAIRES · EXAMPLE VALUESIllustrative calculation (cosine-cubed law); not a real project.Conceptual visualization
Room illuminance map (conceptual visualization).
What it includes

Scope of the service

  • Workplace lighting

    Offices, warehouses, shops and operational areas: illuminance levels, uniformity and glare control according to the task.

  • Architectural lighting

    Facades, walkways and retail spaces: lighting scenes that highlight the architecture.

  • DIALux evo simulation

    Model of the space, luminaire selection and illuminance calculation with false-color maps and isolines.

  • Integration with the electrical design

    The luminaire layout feeds the circuits, the load schedule and the drawings.

Deliverables

  • DIALux evo calculation report
  • Illuminance maps (false color and isolines)
  • Luminaire layout drawing
  • Reference luminaire specification

What we need to quote

  • Drawings of the space (DWG or PDF) with heights
  • Use of each area and tasks performed
  • Surface finishes or colors, if known
  • Luminaire preferences or constraints

Scope and clarifications

  • Design values (illuminance, uniformity, glare) are set according to the use of the space and the applicable lighting regulation (RETILAP), and are stated in the report.
  • A simulation is a design calculation: actual levels depend on the luminaires installed, the finishes and maintenance.
Frequently asked questions

About lighting design and DIALux evo

What does a false-color map show?

The calculated illuminance at each point of the work plane: each color corresponds to a lux range, which shows areas with too much or too little light.

Can you work with a specific manufacturer's luminaires?

Yes, if the manufacturer publishes the luminaire's photometric data; otherwise equivalent reference luminaires are used.

Do you have an electrical project under way?

Tell us what you need and we will assess the scope of the right engineering solution for your project.

A specialized division of ECOHIDRO. ECOHIDRO also supports environmental compliance, plumbing design and water treatment. [email protected]

See environmental and plumbing services